IN THE DITCH
The 5 Gallon Gas Can Mount is a single piece Aluminum Mount. Made from durable 1/8" Aluminum and holds a 5 Gallon Plastic Fuel Can. This Mount is easy to install with four 5/16" bolts. May be fastened with 21" bungee (not included) or a cable with lynch pin/pad lock (not included) Fits 5 Gallon C.A.R.B. Compliant Cans.
The Simple Dolly Mount is a basic, cost efficient Dolly Mount. The Simple Mount is built to snuggly fit the frame of a speed dolly and mounts securely to the deck of a wrecker. Made of steel, come painted gloss black. Simple Mount, short simple mount, speed mount share the same base plate. This allows the user to upgrade to the speed mount without having to re-drill mounting holes. (Not compatible with the XD Dolly System)
6 Gallon gavanized steel trash can is just the right size to carry on your truck. Includes a lid to keep the mess contained.
The Short Simple Mount is a basic, cost effiecient dolly mount. It differs from the original simple mount because of its shorter design, allowing the dolly wheels to rest on the deck of the wrecker. (Not compatible with the XD Dolly System)
6 Gallon Aluminum Carrier Trash Can Mount is made from 1/8" Aluminum. This is a great way to mount trash cans to any carrier or flat surface. The 6 Gallon Trash Can Mount will hold a 6 Gallon Trash Can or a 5 Gallon Plastic Bucket with Lid. They have four pre-drilled mounting holes for easy installation.
The Wrecker Trash Can Mount allows for easy installation to the deck of a wrecker. The mounts are made from 16 gauge steel or 1/8" Aluminum and are available for 4 gallon trash cans. THey are easy to install with four pre-drilled mounting holes. .
5 Gallon C.A.R.B. Compliant Plastic Gas Can. Plastic Fuel Can meets California Air Resources Board. (C.A.R.B) Requirements for portable fuel containers. Spouts features lock and unlock positons for safety. Can Maintains an air tight seal when not in use to prevent vapors from escaping into the air. UL and ASTM F2234-03 Certified. Approved for use in all states.
W Mount is great for those wanting an easy to install, low cost solution for mounting dolly axles and breakover bar.This Mount is also ideal for those who want to mount their axle in the back of a pickup bed, on top of carrier tool boxes or any flat surface. Mount can be locked by using a padlock (not included). The breakover bar is secured in place with an easy grip thumb screw. W-Mount comes painted gloss black and is ready to bolt on.
The Telescoping Aluminum Axle Tube is up to 40 Lbs. lighter than Steel Axle Tubes, these Aluminum Tubesare easier to carry and set-up.Universal Design retrofits all In The Ditch, Collins, Tolle, Magna Tech and Grainter Brand Dollies. Adjustable from 58 1/4" to 82 1/2" in length. Sold as each.
This Universal Mounting System is built to fit the frame of the speed dolly and mountssecurely to most brands of wrecker bodies. Uses the same bolt pattern that is pre-drilled in Jerr-Dan MPL, MPL40 and Element Wrecker Bodies. The Universal Mount is lockable and comes paintedgloss black. The kit comes complete with everything needed to hold 2 Dolly Frames. 1 Breakable Bar, and Two Axles. (Not compatable with XD Dolly System)
This XD Universal Mounting System is built to fit the frame of the Speed Dolly and mounts securely to most brands of wrecker bodies. Uses the same bolt pattern that is pre-drilled in Jerr-Dan MPL, MPL40 and Element Wrecker bodies. The universal Mount is lockable and comes painted gloss black. The kit comes complete with everything needed to hold 2 Dolly Frames, 1 Breakable Bar and 2 Axles.
The Speed® Dolly is the first in a long line of new innovative products from In The Ditch™ Towing Products. This lightweight self-loading tow dolly is used for recovery of disabled vehicles with the use of a wheel lift or sling. The dolly easily mounts under the disabled axle of the vehicle allowing the operator to transport to a safe location.
XD Speed Dolly Complete Set with Aluminum D.O.T. Approved Wheels, 5.70 x 8 tires. Complete set includes (2) Speed Dolly frames in Tuff Coat Finish with Aluminum Wheels, (2) Telescoping Aluminum Axles, (1) Soft-Grip, Lightweight Breakover Bar, (2) Ratchet Straps and (1) Operations Manual. 4,000lb Rating
This lightweight self-loading tow dolly is used for recovery of disabled vehicles with the use of a wheel lift or sling. The Dolly easily mounts under the disabled axle of the vehicle, allowing the operator to transport to a safe location. Great for towing in tight-squeeze area where there isnt sufficient room for use of the breakover bar.Balanced for easy carry. Billet aluminum lifting handle. The speed dollies have the longest aluminum telescoping axles. Axles feature an easy-to-use rounded snap button. The ITD2478 featuresa dipped zinc coating for more protection than paint alone. Both sets have a 3,040 Lbs. WLL.
With it's 4,000 lb. rating, High Strength Alloy wear surfaces, Computer-Designed Rigid Boxed Frame, Heavy Duty Tires, and Tuff-Coat Finish, this dolly is in a class of it's own! This dolly is built to handle adverse conditions. It has incredible ground clearance and axles that are robotically welded and designed to stand up to the rigors of today's SUV's and Crossovers. It's available with Zinc Plating to stand up to severe weather conditions. Plus it's simple to maintain, has no gizmos, exposed springs, or latches to rust up or fall off. Comes with a 30 day Money Back Guarantee and a 1 year warranty.