Product Categories
In The Ditch
Search Results
Back
# ITD1138
Small Cord/Hammer Bracket is great for storage of hammers, mallets, jumper cables, straps, bridles, along with many other things. Quick and easy to install; Simple Weld, Rivet, or Screw to any door or wall of a tow truck. Quick easy and organized
Large Aluminum Cord/Hammer Holder
# ITD1139
Large Aluminum Cord/ Hammer Bracket is great for storage of Hammers, Mallets, Jumper Cables, Straps, Bridles, along with many other things. Quick and easyto install; Simply weld, rivet, or screw to any door or wall of a tow truck. Quick, easy, and organized.
# ITD1087
6 Gallon gavanized steel trash can is just the right size to carry on your truck. Includes a lid to keep the mess contained.
5 Gallon Aluminum Gas Can Mount
# ITD1091
The 5 Gallon Gas Can Mount is a single piece Aluminum Mount. Made from durable 1/8" Aluminum and holds a 5 Gallon Plastic Fuel Can. This Mount is easy to install with four 5/16" bolts. May be fastened with 21" bungee (not included) or a cable with lynch pin/pad lock (not included) Fits 5 Gallon C.A.R.B. Compliant Cans.
# ITD1352
The Simple Dolly Mount is a basic, cost efficient Dolly Mount. The Simple Mount is built to snuggly fit the frame of a speed dolly and mounts securely to the deck of a wrecker. Made of steel, come painted gloss black. Simple Mount, short simple mount, speed mount share the same base plate. This allows the user to upgrade to the speed mount without having to re-drill mounting holes. (Not compatible with the XD Dolly System)
# ITD1353
The Short Simple Mount is a basic, cost effiecient dolly mount. It differs from the original simple mount because of its shorter design, allowing the dolly wheels to rest on the deck of the wrecker. (Not compatible with the XD Dolly System)
# ITD1056
6 Gallon Aluminum Carrier Trash Can Mount is made from 1/8" Aluminum. This is a great way to mount trash cans to any carrier or flat surface. The 6 Gallon Trash Can Mount will hold a 6 Gallon Trash Can or a 5 Gallon Plastic Bucket with Lid. They have four pre-drilled mounting holes for easy installation.
# ITD1054
The Wrecker Trash Can Mount allows for easy installation to the deck of a wrecker. The mounts are made from 16 gauge steel or 1/8" Aluminum and are available for 4 gallon trash cans. THey are easy to install with four pre-drilled mounting holes. .
5 Gallon C.A.R.B. Compliant Plastic Gas Can (RED)
# IDT7041
5 Gallon C.A.R.B. Compliant Plastic Gas Can. Plastic Fuel Can meets California Air Resources Board. (C.A.R.B) Requirements for portable fuel containers. Spouts features lock and unlock positons for safety. Can Maintains an air tight seal when not in use to prevent vapors from escaping into the air. UL and ASTM F2234-03 Certified. Approved for use in all states.
# ITD1090
2.5 Gallon Gas Can with Quick Release Mount. Pull T handle to release can mount in seconds. No more rubber straps,bungees, ratchets,or hooks. Mounts easily to any surface.
# ITD1242
W Mount is great for those wanting an easy to install, low cost solution for mounting dolly axles and breakover bar.This Mount is also ideal for those who want to mount their axle in the back of a pickup bed, on top of carrier tool boxes or any flat surface. Mount can be locked by using a padlock (not included). The breakover bar is secured in place with an easy grip thumb screw. W-Mount comes painted gloss black and is ready to bolt on.
48"X16" Aluminum Mounting Box Top
# ITD1121
48"X16" Aluminum Mounting Box Top. Use the space on top of your tool box to store chain or other safety accessories with this aluminum box top. 4" Tall, 16" Wide and are available in several lengths. Can be ordered with or without dividers. Mounting is a snap. Just screw down to the top of the tool box. Made from 1/8" Aluminum. Box tops are easy way to create extra storage place.
# ITD1132
Aluminum Tire Stands are a critical product for any tow truck. The Aluminum tire stands allowan operator to safely crawl under a vehicle to secure frame forks. They also come in handy when used in a double pick situation. Each Aluminum tire stand has a load rating of 6,000 lbs. (12,000 Lbs. per set) The AluminumTire stands are lightweight weighing only 16 Lbs. each.
Telescoping Aluminum Axle Tube, Sold as each
# ITD1400
The Telescoping Aluminum Axle Tube is up to 40 Lbs. lighter than Steel Axle Tubes, these Aluminum Tubesare easier to carry and set-up.Universal Design retrofits all In The Ditch, Collins, Tolle, Magna Tech and Grainter Brand Dollies. Adjustable from 58 1/4" to 82 1/2" in length. Sold as each.
# ITD1162
This Universal Mounting System is built to fit the frame of the speed dolly and mountssecurely to most brands of wrecker bodies. Uses the same bolt pattern that is pre-drilled in Jerr-Dan MPL, MPL40 and Element Wrecker Bodies. The Universal Mount is lockable and comes paintedgloss black. The kit comes complete with everything needed to hold 2 Dolly Frames. 1 Breakable Bar, and Two Axles. (Not compatable with XD Dolly System)
# ITD1349
All in one Speed Dolly Storage Rack, The Intergrated Speed Mount makes installationa snap. Simply set the mount on the edge of the deck, mark the pre-drilled holes with a marker, drill holes and install the integrated speed mount. In matters of minutes, you have installedsimple storage for speed dollies, Aluminum Axles and Break-Over Bar. Each integrated speed mount holds a single dolly, A single aluminum telescoping axle and a light-weight breakover bar. The Speed Dolly holds the axle in place. To remove from mount, simply remove the speed dolly, which unlocks the axleand then loosen the thumb screw and removethe break-over bar. The integrated speed mount is steel and painted gloss black. Fits most Miller Industries wreckers and the Jerr-Dan HPL series wreckers.
Jerr-Dan XD Dolly Mount System
# IDT1182
This XD Universal Mounting System is built to fit the frame of the Speed Dolly and mounts securely to most brands of wrecker bodies. Uses the same bolt pattern that is pre-drilled in Jerr-Dan MPL, MPL40 and Element Wrecker bodies. The universal Mount is lockable and comes painted gloss black. The kit comes complete with everything needed to hold 2 Dolly Frames, 1 Breakable Bar and 2 Axles.
Zinc Tilt and Slide Dolly Mount
# ITD1350P
Zinc Chromate Tilt and Under The Body Slide Out Dolly Storage Mount. Mounts come painted flat black and feature a vice-action lockable latch and a slide out, tilt up design. Pre-drilled for easy installation. Sold as each. Order 2 to make a set. Available in Zinc Chromate Finish, which is more durable than paint.
# ITD2480
The Speed® Dolly is the first in a long line of new innovative products from In The Ditch™ Towing Products. This lightweight self-loading tow dolly is used for recovery of disabled vehicles with the use of a wheel lift or sling. The dolly easily mounts under the disabled axle of the vehicle allowing the operator to transport to a safe location.
Shopping Cart
0 items
Quick Find
